BondTech QR Ultimaker 3 Extruder Kit unter Bondtech
BondTech QR Ultimaker 3 Extruder Kit

BondTech QR Ultimaker 3 Extruder Kit

Marke / Kategorie: Bondtech

This extruder upgrade kit for the Ultimaker3 printers replaces the original feeders, it comes with it´s own Nema17 high precision geared steppermotor.

It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the extruder never looses grip of the filament so grinding, slipping is a thing of the past.

The high resolution makes printing with small nozzles <0.30 mm a simple task for those high-res prints.

The included mounts in FDM printed PETG installs at the top of the rear side of the printer.

Installs in about an one hour with standard tools available.

E-steps needs to be updated to 492.45 and the feeding speed used when performing a Material Change from the LCD of the printer.

The reason for why the stepper motor stalls is that our motor uses a planetary gear reducer, this means that the motor will have to turn faster to feed at the same speed as the original feeder.

There is no firmware with updated e-steps available since the Ultimaker3 uses another type of firmware than the Ultimaker2, for Ultimaker 3 the configuration needs to be updated directly on the printer, for more information please see the installation guide.

Full installation guide available at the tab installation guide

For best performance also use PTFE tube 3.18/6.4 mm diameter

- BondTech QR Ultimaker 3 Extruder Kit ist ein Artikel vom Anbieter buw. Hersteller Bondtech.

Weiteres aus Bondtech

BondTech Motor Cable JST-XH6 -  JST-XH4

BondTech Motor Cable JST-XH6 - JST-XH4

This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.

Controller side      Motor side
PIN 1  —————– PIN 1
PIN 2 —————– PIN 4
PIN 3 —————– PIN 3
PIN 4 —————– ...

Bondtech Mosquito 24V 50W heater

Bondtech Mosquito 24V 50W heater

  • Compatibility : for units with 24v PSUs
  • Power : 50W

For Engineering-grade Plastics

Like upgrading the engine in your car, suddenly an unsuspecting machine can compete with the top of the line. The 50W Heater Cartridge ...

BondTech Upgrade Kit for Creality CR-10S with mount

BondTech Upgrade Kit for Creality CR-10S with mount

This extruder upgrade kit for the Creality CR10S, Ender, Tevo Tornado and other printers that uses the same type of mounting plate will replace the original feeder.

It allows for a more reliable printing with all sorts of ...